Running wires to connect a new electrical accessory is a time consuming project and, if done without the proper tools and experience, potentially disastrous.
What the world needs is a safer more efficient solution
INTRODUCING THE TRIGGER WIRELESS ACCESSORY CONTROLLER!
TRIGGER is Patent Pending
6 channels, 2 x 30 amp circuits, 2 x 10 amp circuits, 2 x 5 amp circuits, All Solid State, 12-24 volt.
RF Remote switch pad usable inside or outside the vehicle.
Bluetooth control from phone/tablet app .
Manual buttons for on/off on top of case.
DIN connector built in for manual control with conventional toggle switches (harness sold
Low voltage cutout to shut down Trigger if battery voltage gets low.
100 amp fuse installed on positive input wire for protection.
12 to 24 volt out with waterproof connectors.
Fuses built in, waterproof cover (30 amp - 1 and 2, 10 amp - 3 and 4, 5 amp - 5 and 6)
LEDs to indicate relay on and if fuse is blown, blue for circuit on, red for blown fuse.
Waterproof case design, withstands temps to 250 deg. F and below freezing.
12 to 24 volt input, 3 wires, ground, switched positive, battery positive.
2.4 ghz frequency hopping RF connection to control box.
Replaceable battery power and/or 12 volt hardwired option for backlit switches .
Back lit with press of button, delayed off for the back light. If hardwired, provides a color changing
option adjustable from App. Back lights stay lit when vehicle lights are on.
Custom switch labels included.
Apps for both Android and iOS with simple interface for turning on and off the 6 channels. Allows
customized names for each channel.
Battery voltage shows in App screen.
Controls backlight color in the RF switch pad.
App allows for dimming and strobe functions in addition to ON/OFF.
Kit includes six 8 wire harnesses with the mating connector to the control box on one end and
blank wires on the other. Two 12 gauge, two 14 gauge, two 18 gauge.
Harnesses include sturdy vinyl shroud.